Collapsible Bladder Water Tank 600 to 12000 Litres
|Suitable for Drinking Water (Potable)||Yes|
|Construction Material||High-Density PVC (1100GSM)|
- Provides emergency water supply for remote areas in the event of fire or drought
- Many applications including farming, watering plants, construction, waste water & drinking water
- Simple to install by just one person in around 10 minutes
- Lightweight and small when folded – can be easily fit into a car / van
- Reusable and cost-effective
- Resists extreme temperatures from -30 to +70 degree Celsius
- Can be ratchet strapped to a vehicle bed – making them even more versatile
Lightweight, portable and convenient, our collapsible bladder water tank is ideal for sites that are remote or have limited access. Constructed from durable high density PVC, these collapsible water tanks are suited for even the most extreme weather conditions – capable of withstanding temperatures from -20°C to 70°C.
Not only are these tanks resistant to extreme temperatures, they are also suitable for drinking water, environmentally friendly and non-toxic – as well as being resistant to corrosion, wear, and pressure. Their durable construction makes them capable of being reused, with a lifespan of up to 10 years.
Due to their efficient size and weight when emptied, these bladder tanks can be easily carried by hand to where they are needed. Whether going across fields with limited access or down narrow alleys and footpaths, you're sure to get these flexible water tanks where they're needed without hassle.
Setup is easily managed by one person in a matter of minutes: Simply place your tank and unfold it onto a flat and clear surface. Then thread the included valve onto the bottom outlet and close off the valve. Fill the tank from the inlet positioned on its top. Once filled to your desired capacity, cap off the inlet with the included threaded bung.
When it is time to remove the tank, simply drain its contents, disconnect the bung and valve and fold back up for storage.
These tanks come with 2" BSP female inlets/outlets, one positioned at the base of the tank on the shorter side and the other on the top of the tank towards the rear. 4" BSP fittings can be fitted for an additional cost, should you require a larger outlet or inlet. Please contact us directly for more details.
Also included is a 2" ball valve and a 2" blanking cap as standard to let you fill your tank immediately.
Also known as a pillow tank, bladder tank or flexi water tank. Great for emergency or temporary drinking water storage/supply, camping sites, construction sites, drought relief and more.
We have a selection of optional fittings to help you with filling or decanting your bladder tank. Our camlock fittings allow you to quickly connect lengths of hose by clamping them, as opposed to threading your pipe or hose each time. Simply thread the adaptor onto the tank and the coupler to your hose and clamp them together with the lever arms on the coupler. We also offer a hose barb to camlock coupler, if your hose is usually pressure fit.
Had another fitting in mind? We have an extensive range of fittings which are bound to suit your needs – check out our Couplings category
- x1 Collapsible Bladder Tank of your choice (600L – 12,000L)
- x2 2" Female BSP inlet/outlets
- x1 2" Male BSP ball valve
- x1 2" Male BSP blanking cap
- x1 Roll of PTFE tape
- x1 Repair patch