IBC Tipper Unit - Steel
|Weight - kg||42|
|Length - mm||1010|
|Width - mm||1210|
|Height - mm||200|
The IBC Tipper is a mechanism designed to maximise the dispensing of your IBC while avoiding waste, environmental and safety hazards.
The IBC Tipper works by tilting the IBC as its contents are used, thereby increasing pressure at the tap and allowing more liquid access to flow out. Depending on the value of the liquid, this could redeem significant losses through waste quickly, and with little fuss.
We require you to select the tilt angle for your tipper. We recommend 5 degrees as standard and 8-10 degrees for more viscous liquids. If you are unsure, please contact us.
Please Note: At 8 degrees or above it can be difficult to load and unload the tipper from the side.
A tipper may be used on its own or can be customised with a variety of options as detailed below.
IBC Tipper Options
The IBC Tipper is available with an optional stand. This is intended to hold the IBC and Tipper 40cm above the ground so a dispensing pump can be mounted below.
Another additional option is for heavy duty castors to be attached to the bottom of the Tipper unit, allowing it to be used as a trolley on which the IBC can be moved around freely.
The IBC Tipper can be modified to take a drum, for which it works just as effectively. The unit will still accept an IBC, meaning it can be used as a dual-purpose tipping unit.
IBC Tipper Skirt
A protective skirt can be fitted to safeguard the metal of the tipper from being scratched when placing an IBC on the tipper. The tipper skirt also covers the springs of the unit, in order to protect them against the outdoor elements.
150mm Legs with Fork Supports
A set of short legs can be provided that allow fork lift forks to slide under with ease. This enables the IBC to be moved around with the tipper attached - chains clip around the fork to secure the IBC during movement.
Please Note: The unit and any optional extras will be provided in steel. If you require greater durability, please see our painted, powder coated, galvanised or stainless products.
|Height (mm)||Width (mm)||Length (mm)||Weight (kg)||Weight with optional stand (kg)|